How much do shingles cost for a 2000 sq ft house?

Asphalt Shingle Cost Reroofing a house with asphalt shingles costs between $5,300 and $11,000, or $7,211 on average for a 2,000 square feet house. However, that doesn’t include the cost of removing the old roof. Reshingling a home with asphalt is the most affordable option.

How much does a bale of shingles cover?

Calculating the number of bundles, you need is simple if you are using shingles that come three bundles to a square. Each bundle covers 33.3 sq. ft. of roof area—which is close enough to the 32 sq.

How much does it cost to put a square of shingles on a roof?

A replacement could be as low as $1,200 or as high as $30,000. With that said, on average, most roofing companies will charge somewhere between $3.50 and $5.50 per square foot, or $350 to $550 per square (100 square feet) to install or replace an asphalt shingle roof.

How many bundles of shingles do I need for a 12×12 roof?

Asphalt shingles and most other roof shingles are typically available in bundles. For each roofing square or 100 sq ft, you will need three bundles of shingles. The average size of 12×12 shed roof is 3 squares, which typically requires 9 bundles of three-tab asphalt shingles or any other starter strips.

Can you roof over old shingles?

Roofing over an existing roof is also called reroofing or an overlay. It is the process where roofers install a new roof over your existing one, i.e. add a new layer of shingles, which means that the old roof will not be removed/teared off.

How many bundle of shingles do I need?

Asphalt shingles and most other roof shingles are typically available in bundles. For each roofing square or 100 sq ft, you’ll need three bundles of shingles. The average size of a roof is 30 squares, which typically requires 90 bundles of three-tab shingles or any other starter strips.

How many squares is a bundle of shingles?

Typically, a bundle covers 33 square feet. Bundles usually weigh the same regardless of the number of shingles because they’re designed to be carried by one person.

How much does 10 square of shingles cover?

Roofing contractors estimate projects and materials by the square, so it is crucial to find this measurement to estimate the amount of material needed accurately. A square simply refers to a 10′ x 10′ square of roofing. This is simply 100 square feet of roof.

How many bundles of shingles do I need for 100 square feet?

However, the vast majority of shingles require only 3 bundles per 100 square feet. For most shingle types, you’ll need 3 bundles to make a square of finished roof, which is 100 square feet. If you have a roof area of 3000 square feet, you’ll need 90 bundles of shingles.

How many shingles do I need for 200 square feet?

Thus, for a 200 square foot gable roof, you would need 6 bundles of shingles plus 10% of ridge, starter and wastages. Thus, it will take 6 bundles of 3-tab standard size shingles (12″×36″) to cover 200 square feet roof.

How many bundles of shingles are in a square of GAF?

Often, three bundles of prepackaged asphalt shingles make one square, as is the case with the Timberline® HDZ™ Shingles.

How do I calculate shingles for my garage roof?

To estimate how many shingles you’ll need, first estimate the total square footage of your roof’s surface. To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane.

How many square feet is a 2 car garage?

How Many Square Feet is In a 2 Car Garage? The average sized 2 car garage’s square footage usually ranges from 400 (20×20), 576(24×24), and 720 (24×30) square feet.

How many layers of shingles can you put on a house?

House roofs should never exceed three layers of shingles. Adding additional layers without excavation can save homeowners up to $1,000 in labor. Therefore, layering has advantages. Building and city codes require roofers to limit shingle layers to two.

Do I need to remove old shingles before installing new shingles?

Whether repairing one section of roof, or a replacing a whole one, it’s always best to pull up the old shingles before putting down the new ones.

How do I calculate roofing materials?

To estimate roofing materials, start by finding the total square footage of the roof and divide the number by 100 to determine the number of ‘squares’ in the roof. Since it takes 3 bundles of shingles to cover a square, plan to purchase 3 bundles for each square. Then, add 10% to the number to account for waste.

How many squares of shingles do I need for 1800 square feet?

Thus, for a 1800 square foot house or 23 squares, you would need 69 bundles of shingles (23 square x 3 bundles per square = 69 bundles). For a 1800 square foot house foot print, you will need approximately 23 squares or 69 bundles or 2000 pieces of standard size 3-tab shingles (19×3 = 57 bundles) to cover roof.

What happens if shingles fall off roof?

The easiest way to repair roof shingles that have blown off is to individually replace them or replace a series of them. The damaged shingles can be removed and new ones can be put into their place. However, these patches may be noticeable, as weather conditions can cause the older shingles to fade in color.

What is the cost of shingles?

Price can vary depending on the slope, pitch, and size of your roof as well as the quality of the asphalt shingle you choose. You can expect to pay $1.50 to $5.50 per sq. foot or $150 to $550 per square installed on a standard sized single story home.

What is a square of shingles?

A square of shingles is the total number of shingles that are needed to fill a square on a roof, no matter how that square is measured (10′ x 10′ or 4′ x 25′, for example). Shingles are often sold by the bundle and there are usually three bundles per square, but this may differ depending on the shingles you’re using.

Don’t forget to share this post !