Cutting acrylic on the table saw or miter saw is the same as cutting wood, so long as you use the correct blade. The blade should indicate that it’s meant for cutting plastic or acrylic. Sometimes it helps to apply a strip of painter’s tape to the cut line first.

Can you use a miter saw to cut plastic?

Miter saws can cut PVC and other plastic construction materials with general ease. You may choose to use a melamine saw blade, however, a standard miter saw blade will be fine to use for a few cuts.

What kind of saw do I need to cut acrylic?

Jigsaws can be used on acrylic sheets upto 6mm thick. Circular saws can be used on acrylic sheets of all thicknesses. Use jigsaws with metal cutting blades of reduced depth and sharp teeth (5-6 teeth per cm) – use the finest blade you can. Be sure to allow the blade to stop before withdrawing from the cut.

Can I cut acrylic with a saw?

Keep in mind that only cast and polycarbonate acrylic should be cut under a power saw since anything softer will melt or crack. Measure the cut you wish to make and mark it on the acrylic sheet, keeping in mind the saw’s width.

How do you cut acrylic sheets without cracking them?

Tips to Avoid Cracking or Breaking Plexiglass as You Cut

Keep the plastic film on. As mentioned above, plexiglass usually comes with a thin layer of plastic film intended to prevent scratches as the material travels from manufacturer to retailer to your workshop. …
Score deep. …
Use the right blade. …
Keep the blade cool.

Cut Plexiglass With Miter Saw

What is the best tool to cut hard plastic?

The three best types of saws for cutting thick plastic are a fine-toothed saw, a jigsaw, and a table saw.

A fine-toothed saw works best for precision plastic cutting. …
A jigsaw is ideal for cutting thicker pieces of plastic like piping. …
A table saw excels in cutting through bigger plastic pipes or thick plastic blocks.

Which saw is used for cutting plastic?

Use the circular saw (or table saw) to cut through the plastic in the same way you’d cut through wood.

Can a Mitre saw cut acrylic?

Cutting acrylic on the table saw or miter saw is the same as cutting wood, so long as you use the correct blade. The blade should indicate that it’s meant for cutting plastic or acrylic. Sometimes it helps to apply a strip of painter’s tape to the cut line first.

Can you cut acrylic with a saw?

Keep in mind that only cast and polycarbonate acrylic should be cut under a power saw since anything softer will melt or crack. Measure the cut you wish to make and mark it on the acrylic sheet, keeping in mind the saw’s width.

What blade do you use to cut acrylic?

Carbide tipped saw blades are recommended for superior cuts and longer life of the cutting edge.

10″ diameter, 60 & 80 tooth.
12″ diameter, 60, 80 & 100 tooth.
14″ diameter 60, 80 & 100 tooth.

Can you cut acrylic with miter saw?

Cutting acrylic on the table saw or miter saw is the same as cutting wood, so long as you use the correct blade. Just switch out the blade as directed in your saw’s owner’s manual before making the cut. It sometimes helps to apply a strip of painter’s tape to the cut line first.

How do you cut acrylic without cracking it?

Tips to Avoid Cracking or Breaking Plexiglass as You Cut

Keep the plastic film on. As mentioned above, plexiglass usually comes with a thin layer of plastic film intended to prevent scratches as the material travels from manufacturer to retailer to your workshop. …
Score deep. …
Use the right blade. …
Keep the blade cool.

How do you cleanly cut acrylic sheets?

Cutting with a hand saw: Most people prefer to cut acrylic using a hand saw. …
Cutting with a scoring knife: It is one of the easiest methods to cut acrylic table tops. …
Cutting with a jigsaw: A jigsaw is one preferred tool for cutting acrylic sheets. …
Cutting with a band saw: …
Cutting with a laser:

Can you cut acrylic sheets with scissors?

Acrylic is different than cutting many other materials because the dimensions need to be exact to ensure proper fitting with other pieces. Incorrectly cutting acrylic can be a costly mistake if you need to sand down inches off the material to make sure it’s even and unchipped, so always use the sharpest blade possible.

What should you never cut with a miter saw?

Keep hands out of the path of the saw blade. NEVER CUT A PIECE WHERE YOUR HAND WOULD BE 6 INCHES OR LESS FROM THE BLADE. Find a safe way to secure the work as it must be held down to the table top and Page 3 against the fence during the entire cutting process.

What kind of saw blade Do I need to cut plastic?

The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS, styrenes, PVC, and both high and low melt nylons.

What can I use to cut hard plastic?

You can use a hacksaw, fine-toothed saw, circular saw, or jigsaw to cut plastic. If you use a hacksaw or circular saw, you’ll also need a plastic cutting blade. Avoid using saws or blades with large teeth because they will chip or break the plastic and create rough edges.

Faq

About the Author

Tommy E. Junkins

Head of writers

We believe that everyone needs to have free access to a wealth of information. Feel free to explore our rich categories and find answers to your questions. We hope you enjoy our world.

View All Articles